![]() |
|
|
Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Coupe/interceptor adopter
Join Date: Nov 2008
Location: Adelaide
Posts: 580
|
Hi Matt,
What would be the best front braking setup for an RTV with the 16" Sunraysia steel rims? |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2011
Location: VIC
Posts: 1,130
|
Won't be able to go any bigger than your current setup with 16 inch rims. Minimal would be 17inch rims so you can runs turbo falcon/ territory front brakes.
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Jun 2008
Location: Perth, Western Australia
Posts: 2,009
|
You want to find a set of the PBR 325mm front brakes.
Bloody hard to find. Way better than the 322mm stuff. 325mm setup = 32mm thick rotors and better calipers. 322mm setup = 28mm thick rotors and standard Falcon calipers. Both will require 17" rims.
__________________
Click here for my previous Photo Essays and Build Threads.
------------------------------- Good people. Bad people. Smart people. Dumb people. Car crashes. Vomit. Read about it all at Cabloid, the web site that has stories and photos about my life driving a taxi at night. www.cabloid.com.au |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
XR50T
Join Date: Dec 2010
Location: Sydney
Posts: 870
|
What Phil said. I tried to fit the sunraysia over a few different setups when I had my RTV. Needs 17s at least for anything bigger.
__________________
2010 XR50T UTE |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,613
|
Well that pretty much answers than then. Thanks guys always good to get feedback from people who have tried and tested.
Last option is some DBA T3 Slotted rotors and some DS Performance brake pads for std size replacement.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
||
![]() |
![]() ![]() |
![]() |
#7 | ||
HSV - I just ate one!
Join Date: Dec 2004
Location: Middle of nowhere
Posts: 3,111
|
Well..... I'm gonna chime in here that I recently purchased a Jan 2006 BF XR8 ute that needs some TLC
Well.... first thing I did (literally backed it off the trailer and onto the shed floor and it had jacks under it) was swap a few wheels around so I could drive it, and the first wheel I tried was one of the spares from my RTV, and I can confirm that the RTV sunrasias DO clear the 322mm front brakes that are standard on a BF XR8 I was running out of daylight so I cant confirm how much clearance there is (looked to be next to nothing), but the wheel bolted up to the hub happily and turned without any bad noises.
__________________
I dont care if some prius driving eco-hippy thinks its politically incorrect for me to drive a V8..... I'm paying for the fuel! |
||
![]() |
![]() ![]() |