Pads for BF XR6T

LPGUTE · 27-08-2012, 07:46 PM

hi matt, i got a set of caliper from a BF XR6T and need front and rear pads, also rear rotors, is there a way to tell whether it had the vented rear or not? it got DB1675 style pad from bendix. what braided brake hose suit them best will be fitting them on an AU XR6

**FLOORED** · 28-08-2012, 09:22 AM

Quote:

Originally Posted by LPGUTE

hi matt, i got a set of caliper from a BF XR6T and need front and rear pads, also rear rotors, is there a way to tell whether it had the vented rear or not? it got DB1675 style pad from bendix. what braided brake hose suit them best will be fitting them on an AU XR6

If you have the DB1675 pad then you have vented rears but fitting that kit to the rear of a AU will have some issues as they foul on the backing plate and the handbrake lever from memory. There have been some people on the forum that have made them fit whicj i think involved removing the backing plate but you may want to read up on fitting the rear 328mm kit before you buy rotors etc. Front pads are fine and also braided lines are ok i will have to custom make some.