![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Apr 2017
Posts: 2
|
Hey,
Does anyone know the diameter of the stock exhaust on an LV Zetec 2.0L, Im saving up for a new system but in the meantime am going to practice my mig skills and replcae the curved down end of the stock exhaust with a nice tip to fill out the rear diffuser, Does anyone know the diameter of the stock exhaust so I know what size mild steel to pick up. And on the topic anyone have any suggestions of bolt on exhausts for the Zetec. Cheers |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Chairman & Administrator
![]() ![]() Join Date: Dec 2004
Location: 1975
Posts: 107,005
|
Exhaust diameter should be 2" except the flex pipe which is 1 7/8".
Cheers Russ
__________________
Observatio Facta Rotae
|
||
![]() |
![]() ![]() |