![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Lukeyson
![]() Join Date: Mar 2005
Location: Maitland, NSW
Posts: 2,580
|
Hi all
I have a question. I have a small 'bracket' that is welded to a cross member on a factory vehicle. See the image below. I want to dremel off this bracket, move it sideways, and then weld it back on. It is folded 3mm metal and I can see that it is only lightly welded into place. This is to fit a FWD Transmission swap (IB5 to MTX75). I am in NSW. I'm new to this and not afraid at having a go. Does anyone know how this is interpreted for Compliance purposes? There would be no cutting or weakening of the actual cross member, and I'm just relocating a factory component. I expect I'd have to have the welds done by a professional as my poke-and-stab splatter welds are not very robust. Luke
__________________
If the human brain was simple enough to understand, we'd be too simple to understand it. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Kicking back
Join Date: Dec 2013
Location: Western sydney
Posts: 8,548
|
Theres 2 things. Speak to an engineer for their opinion. Or just do it and see if anyone notices come pink slip time. Id probably speak to an engineer first. Ive had a trailer blue slipped before. It wasnt modified, but had it been and they were satisfied theyd just issue a mod plate. Im guessing the same goes for cars done in such a fashion that its all good. The only other hurdle i can see is insurance stuff.
|
||
![]() |
![]() ![]() |
![]() |
#3 | |||
^^^^^^^^
![]() ![]() Join Date: Jan 2005
Location: online - duh
Posts: 9,634
|
I went and found this hoping to find you a way out, unfortunately I think the document pretty clearly spells out it does require certification. Though that should be straight foward if you are just simply relocating the existing bracket.
https://www.rms.nsw.gov.au/documents...ifications.pdf Quote:
Or you could just do it anyway ![]() .
__________________
. |
|||
![]() |
![]() ![]() |
2 users like this post: |
![]() |
#4 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,919
|
I’d go with “just do it anyway”. Looks like a removable subframe.
When I’ve shifted stuff like this I take it for re-welding to a bloke who builds insanely powerful bikes. I trust his knowledge of what makes a good strong fixing point, as a misjudgment in his normal work could be fatal. The intent of the code in a situation like this is to block silly stuff, not carefully planned adjustments... |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Lukeyson
![]() Join Date: Mar 2005
Location: Maitland, NSW
Posts: 2,580
|
Thanks
That looks like the NSW RMS VSI 6 document. You're right in that this tells me what has to be certified versus what doesn't. I've also had a look at the national ADR NCOP (National Cope of Practice) VSB14 guidelines that include a lot more detail. I didn't find specifics of what I was looking for. I thought there might be some things that you just could not do - some things Allan has mentioned on the Skid Factory around steering and engine mounts raised questions for me I was trying to clarify. Questions to a certifier it will have to be. Luke
__________________
If the human brain was simple enough to understand, we'd be too simple to understand it. |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Regular Member
Join Date: Oct 2010
Location: Perth
Posts: 391
|
Depending how good your welding is, if you do it neatly, then repaint it, and then age it a bit, dirty it up, it would be all but impossible to detect...
|
||
![]() |
![]() ![]() |
![]() |
#7 | ||
Guest
Join Date: Aug 2018
Posts: 1,892
|
|
||
![]() |
![]() ![]() |