|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
|
|
Thread Tools | Display Modes |
13-11-2011, 08:47 PM
|
#1 | ||
|
Regular Member
Join Date: Oct 2007
Posts: 479
|
Hello.
I seem to be getting good responses from this forum so thought I may as well ask another question. What cam is the best suited for drag racing? without compromising too much on the street with a bit of.. you know what. I am trying out a Wade 1673 with no vernier cam gear at the moment, an I am not really feeling any difference.. Then again I did buy this cam off a random, an claims it is billet. I measured the base circle as asked Wade, an he said that it wont require shims. I think I may need to remove the cam an measure the lobe an work out lobe lift an valve lift to make sure it is even the claimed cam. As now, I tryed using the cam an I was doing worse off, then again, I couldn't get a good 60 foot time though i did expect my mph to be better at least, an if anything it was 1-2mph slower.. |
||
|
|
Best cam suited for e-series i6?
Threaded Mode