|
03-06-2007, 12:37 AM | #1 | ||
Starter Motor
Join Date: May 2007
Posts: 2
|
Hi guys I'm new here, anyways I have a 1985 TX5 Ghia. And lately auto windows have been causing lots of problems(like not winding up). Is there any way for me to get them to work manually? Any advice will help. Thanks in advance.
|
||
03-06-2007, 01:34 AM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
yes you only need to purchase the standard winding mechanisims handles and door openers and the door trims to go with it ..
the glass should be the same fitting check theses things out with a wrecker mazda and ford in that model are the same the wiring looms can stay in the doors and not be connected just remove the fuse after that the door trims come off and the window rails should be the same and also the bolt holes next sell the electrical set up on ebay or a forum or make a trade with a wrecker :
__________________
My car goes Brumm Brumm |
||
03-06-2007, 09:41 PM | #3 | |||
Starter Motor
Join Date: May 2007
Posts: 2
|
Quote:
|
|||