Ford pattern 355mm (14") rotors

Craney · 19-07-2009, 09:52 PM

Hi,
I would like to source a pair of ordinary, one piece, nothing flash, 355mm rotors in a ford stud pattern (Mustang castings most likely) similar to these. I dont want slots as I'm an old school drilled rotor fan and want to have a classic slanted three hole pattern drilled in once I know the exact pad sweep I will have.

http://www.stage3motorsports.com/pro...ed_Rotors.html

I would much rather spend my money here in Oz.

**FLOORED** · 20-07-2009, 12:53 PM

Quote:

Originally Posted by Crane

Hi,
I would like to source a pair of ordinary, one piece, nothing flash, 355mm rotors in a ford stud pattern (Mustang castings most likely) similar to these. I dont want slots as I'm an old school drilled rotor fan and want to have a classic slanted three hole pattern drilled in once I know the exact pad sweep I will have.

http://www.stage3motorsports.com/pro...ed_Rotors.html

I would much rather spend my money here in Oz.

Can we confirm they are Mustang or FPV rotors first thanks.They both are 355mm x 32mm but the height is different which means the offset is different.If you lay the rotor flat on the ground and run a ruler down through the centre hole the height will either be 47mm or 50.5 and don't forget the wear difference.

Craney · 20-07-2009, 03:55 PM

Quote:

Originally Posted by FLOORED

Can we confirm they are Mustang or FPV rotors first thanks.They both are 355mm x 32mm but the height is different which means the offset is different.If you lay the rotor flat on the ground and run a ruler down through the centre hole the height will either be 47mm or 50.5 and don't forget the wear difference.

Thanks for the info re. the different types. I definitely want the Mustang castings but would like a price for both please.

Price per pair
Pickup from you (no shipping)
Machine finish (no slotting or drilling)

Cheers

**FLOORED** · 20-07-2009, 05:00 PM

Mustang rotors $363 pair 355 x 32 height 47mm
FPV rotors $530 pair 355 x 32 height 50.5mm

Craney · 20-07-2009, 06:50 PM

Quote:

Originally Posted by FLOORED

Mustang rotors $363 pair 355 x 32 height 47mm
FPV rotors $530 pair 355 x 32 height 50.5mm

Champion mate! Thats a good price.
That's a plain finish on those Mustang rotors right?
Can you drill me the pattern I will eventually want?
And how much would that be? Classic 45* three hole pattern.

Do you have these on the shelf. I'd like to pick a pair up the first week of August.

Thanks for all the feedback mate.

**FLOORED** · 21-07-2009, 03:53 PM

Quote:

Originally Posted by Crane

Champion mate! Thats a good price.
That's a plain finish on those Mustang rotors right?
Can you drill me the pattern I will eventually want?
And how much would that be? Classic 45* three hole pattern.

Do you have these on the shelf. I'd like to pick a pair up the first week of August.

Thanks for all the feedback mate.

We don't do drilling sorry only slotting and the rotors would have to be ordered as they are out of stock at the moment.