Chris's Blue beast does a PB! - Page 3

XRQTOR · 07-11-2005, 08:32 PM

Quote:

Originally Posted by the fan

it will now be good to see Chris finish his customers engines, so that they can go racing too

Just want to ask you how many of his customer's have engines sitting waiting to be finished, i doubt there is many if any.

07-11-2005, 08:33 PM

why don't you ask him

XRQTOR · 07-11-2005, 08:34 PM

Quote:

Originally Posted by the fan

why don't you ask him

...........

07-11-2005, 08:37 PM

I know something that you obviously don't pal. Head on over to vicstreetutes.com and see how popular he is there

XRQTOR · 07-11-2005, 08:42 PM

Quote:

Originally Posted by the fan

I know something that you obviously don't pal. Head on over to vicstreetutes.com and see how popular he is there

If your here to start sh*t and bad mouth people i doubt you'll be here long mate, if you have an issure with somone or with there work sort it out with them.

To date i haven't heard of or read of any unhappy people who have been through his doors.

DABOSS · 07-11-2005, 08:44 PM

Quote:

Originally Posted by the fan

I know something that you obviously don't pal. Head on over to vicstreetutes.com and see how popular he is there

Hey buddy YOUR A D*** :the_finge :the_finge :the_finge

Noddy · 07-11-2005, 09:03 PM

Had to have peek, ahhh Chris luv ya work!!!!

Laminge · 07-11-2005, 09:42 PM

Quote:

Originally Posted by the fan

I know something that you obviously don't pal. Head on over to vicstreetutes.com and see how popular he is there

As an admin of the forums let me say this

You Tosser!

Now I wouldnt expect anyone else of the forums to stoop to this level but just let me clarify is further

YOU BLOODY TOSSER!

Goodbye!

X ORSMXR · 07-11-2005, 09:54 PM

Yeah Laminge is the FAN l mean the MAN LOL

Steve · 07-11-2005, 10:06 PM

Quote:

Originally Posted by the fan

I know something that you obviously don't pal. Head on over to vicstreetutes.com and see how popular he is there

All I see is a lot of sh*t stirring by some nervous Holden fans. Some of it's pretty funny, some of it's just a toss. Wanna enlighten us?
I don't know about unfinished engines at Chris' workshop, but I do know that anything that comes out of his workshop is certainly top notch.

**Chris** · 07-11-2005, 10:18 PM

Quote:

Originally Posted by Noddy

Had to have peek, ahhh Chris luv ya work!!!!

Hey mate, how's Nat and the Pup?

Be up your way soon mate. PS autos rock!

Noddy · 07-11-2005, 10:39 PM

Quote:

Originally Posted by Chris

Hey mate, how's Nat and the Pup?

Be up your way soon mate. PS autos rock!

Both well, fridge is stocked.;)

howey · 08-11-2005, 12:49 AM

Can someone tell me the name of Chris' business please. I'm hearing about his work on these pages, but can't file the testimonies away with a name.

FPVWEPN · 08-11-2005, 03:42 AM

its actually under the name of northern diffs

Craig · 08-11-2005, 09:07 AM

Quote:

Originally Posted by howey

Can someone tell me the name of Chris' business please. I'm hearing about his work on these pages, but can't file the testimonies away with a name.

Bluepower Racing Developments (Inside the Northern Diffs building.)
03 9305 3000

jabba · 08-11-2005, 10:36 AM

Quote:

Originally Posted by Chris

Hey mate, how's Nat and the Pup?

Be up your way soon mate. PS autos rock!

You big poof. Buy a manual and learn to drive, why don't you.

:

big_waity · 08-11-2005, 10:58 AM

Woot!

DABOSS · 10-11-2005, 09:01 AM

Here's a pic of the beast from the VSU day.

Note is almost picks up the front wheels. :1syellow1

SpoolMan · 10-11-2005, 09:05 AM

Quote:

Originally Posted by DABOSS

Here's a pic of the beast from the VSU day.

Note is almost picks up the front wheels. :1syellow1

anyone post up the official results from the VSU drag day?

galaxy xr8 · 10-11-2005, 10:55 PM

That Pic is awsome, your right it does nearly lift the front.

X ORSMXR · 11-11-2005, 09:53 PM

Boys keep your eye on the front left wheel in weeks to come we might just see the first launch with a wheel in the air on the blue beast....

Noddy · 11-11-2005, 10:26 PM

Quote:

Originally Posted by ORSMXR

Boys keep your eye on the front left wheel in weeks to come we might just see the first launch with a wheel in the air on the blue beast....

.....and looking forward to seeing the et@mph that will go along with it :voldar02:

Cobra · 15-11-2005, 09:28 AM

Quote:

Originally Posted by Chris

We are working on a project at the moment using the existing camshafts re-phased on the exhaust side, and have had massive results.

Orsm, Sly, DABOSS and a few others have seen me doing this - they know what we are doing, re-phasing the existing cams will tell us where our new cams will want to be - should have them from crow in a few weeks.

Hi Chris,

If the BOSS motors came standard with VCT, would the edit enable you to rephase the existing cams without opening up the motor? It would be awesome if you could fiddle with cam phasing without having to open the motor. Perhaps the 220/230 SOHC v8 might be the weapon of choice if this is the case as it has VCT?

**Chris** · 15-11-2005, 11:34 AM

we could, but they dont come with VCT unfortunately.

Cobra · 15-11-2005, 12:08 PM

But the 220kw v8 comes with VCT doesn't it? I hope VCT is standard on the BOSS motors next model. Would allow even more tuning to be extracted out of the BOSS motors with edit software.

T3rminator · 15-11-2005, 01:00 PM

what does "re-phasing" the cam mean? Is this the same as a "re-grind"?

Quadcams · 15-11-2005, 04:59 PM

Quote:

Originally Posted by fullthrottle

what does "re-phasing" the cam mean? Is this the same as a "re-grind"?

Means changing the timing of the cam shafts where they are relative to top dead centre.

T3rminator · 15-11-2005, 08:16 PM

Quote:

Originally Posted by Lowride260

Means changing the timing of the cam shafts where they are relative to top dead centre.

Cool. If this is something you can do with the existing cams, why do we need to have a new set created from Crow?

Sorry don't mean to hijack Chris's thread but when things like this pop up its hard not to get inquisitive :1syellow1

X ORSMXR · 15-11-2005, 08:19 PM

Quote:

Originally Posted by fullthrottle

Cool. If this is something you can do with the existing cams, why do we need to have a new set created from Crow?

Sorry don't mean to hijack Chris's thread but when things like this pop up its hard not to get inquisitive :1syellow1

Mate just makes things easier l belive it would be quicker to change then adjust..

Quadcams · 15-11-2005, 08:32 PM

Quote:

Originally Posted by fullthrottle

Cool. If this is something you can do with the existing cams, why do we need to have a new set created from Crow?

Sorry don't mean to hijack Chris's thread but when things like this pop up its hard not to get inquisitive :1syellow1

Phasing is very important not right can cost you lots of torque/power also now by re phasing the existing cams Chris knows were the right phasing the new cams should be at, when these are avaliable you should see some execellent grunt out of these motors. It sounds good having bigger cams but the wrong phasing makes them pointless as the ones avaliable at the moment have found out.