Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 19-08-2006, 11:43 AM   #1
Forest Bear
Regular Member
 
Join Date: Jul 2005
Posts: 172
Default Wow, understeer!

A bit of enthusiastic driving yesterday around a big bend. Turned the steering car turned then just slid off the track. Anyway, mounted a small curb. No damage. Just my driver side alloys got badly scratched. Its not serious either but it still bothers me so I'm gonna get it replaced. Anyone know how much for Zetec 17inch (LS) rim at Ford parts?

Forest Bear is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2006, 12:37 PM   #2
Blue_ST170
Regular Member
 
Blue_ST170's Avatar
 
Join Date: May 2006
Location: Sydney
Posts: 129
Default

Nope but if ur understeering a bit add some tire pressure.....Also try 2psi more in the front than the back cause the focus has more weight in the nose....

Bad luck on the rim though...i had the same problem in my parents car after the rear tire had a blowout.... hit the curb and took a chunk outta the rim and the plastic spoiler :MrT_anim:
__________________
03' Imperial Blue Focus ST170
Bluefin Level 2 tune, Custom extractors, Hi-flow cat,
K&N panel filter, EBC Turbo rotors with Greenstuff pads.

Saving for: cat-back exhaust
Blue_ST170 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2006, 12:46 PM   #3
FOCUSonTHIS
FF.Com.Au Hardcore
 
FOCUSonTHIS's Avatar
 
Join Date: Aug 2005
Location: Melbourne
Posts: 2,035
Default

Forrest Bear where do you live? You can always get your alloy wheel repaired like I did when I bought 4 badly scratched 17" rims and got them repaired and they look like new.
__________________
2015 MK7 VW GOLF GTI


__________________
Previous Cars

2002 AUIII XR6
1995 EF Falcon XR6
2003 LR Focus Zetec
1989 KE Laser TX3
FOCUSonTHIS is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2006, 01:02 PM   #4
Blue_ST170
Regular Member
 
Blue_ST170's Avatar
 
Join Date: May 2006
Location: Sydney
Posts: 129
Default

How much did that cost cause i wanna get it done
__________________
03' Imperial Blue Focus ST170
Bluefin Level 2 tune, Custom extractors, Hi-flow cat,
K&N panel filter, EBC Turbo rotors with Greenstuff pads.

Saving for: cat-back exhaust
Blue_ST170 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2006, 01:05 PM   #5
FOCUSonTHIS
FF.Com.Au Hardcore
 
FOCUSonTHIS's Avatar
 
Join Date: Aug 2005
Location: Melbourne
Posts: 2,035
Default

well for 4 rims cost me $600
__________________
2015 MK7 VW GOLF GTI


__________________
Previous Cars

2002 AUIII XR6
1995 EF Falcon XR6
2003 LR Focus Zetec
1989 KE Laser TX3
FOCUSonTHIS is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2006, 03:09 PM   #6
Uni
Regular Member
 
Join Date: Jun 2006
Location: Canberra
Posts: 303
Default

Quote:
Originally Posted by Forest Bear
A bit of enthusiastic driving yesterday around a big bend. Turned the steering car turned then just slid off the track. Anyway, mounted a small curb. No damage. Just my driver side alloys got badly scratched. Its not serious either but it still bothers me so I'm gonna get it replaced. Anyone know how much for Zetec 17inch (LS) rim at Ford parts?
might wanna get it all checked out... alignment etc will be shagged

at least the rest of the car was fine!


Uni/.
Uni is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2006, 06:47 PM   #7
Forest Bear
Regular Member
 
Join Date: Jul 2005
Posts: 172
Default

I live in Melbourne. Yeah. Had a really good look at it today. Its not so bad but its nice and long, along the edge. I heard something about "burnishing" the metal to fix it.

Sure, I wouldn't mind any info about getting it repaired.

I took it on the freeway and drive it to 130km. The steering didn't shake or vibrate. Everything seems fine thank goodness.

I was really worried cos there was a mighty BANG when it hit the curb on the front driver side. I think the suspension must've bottomed out.

I think I will stop thinking I am Tiff Niddel or Jeremy Clarkson and drive more sanely.


Last edited by Forest Bear; 19-08-2006 at 07:30 PM.
Forest Bear is offline   Reply With Quote Multi-Quote with this Post
Old 20-08-2006, 02:19 AM   #8
zetec
Zoom Zoom
 
zetec's Avatar
 
Join Date: Jan 2005
Location: Melbourne, VIC
Posts: 4,352
Default

The curse of the Eagle NCT5's that is.
__________________
2012 Mazda3 MPS
zetec is offline   Reply With Quote Multi-Quote with this Post
Old 20-08-2006, 11:24 AM   #9
BlackLS
Guest
 
Posts: n/a
Default

Yeah NCT5s wreak havoc again.

Also the light "dulled" steering of the LS Focus doesn't help.

A rim should only be $250 from Ford spares ($1000 for a set of 4 as a dealer accessory)

The first thing you should do though is to change the tyres to something decent.
  Reply With Quote Multi-Quote with this Post
Old 22-08-2006, 03:01 AM   #10
kuans
Regular Member
 
Join Date: Apr 2006
Location: W.A.
Posts: 46
Default

any better tyres to recommend? that delivers both grip and quietness?
kuans is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2006, 11:17 AM   #11
mitch_lx
Candy White GTI
 
mitch_lx's Avatar
 
Join Date: Jan 2005
Posts: 1,516
Default

I have zetec focus alloys on my fiesta... they came with NCT5's... *vomits*

the car felt like a big sponge cake aka falcon/commodore.

If you dont mind goodyears buy some eagle F-1's. They are supposed to be an unreal tyre, but they are very noisey.

Other than that i can seriously say BF goodrich G-force sports are excellent tyres!!!
__________________
Volkswagen GTI Polo.
Candy White, Anthracite heated Sports leather seats w/ Red stitching.Tinted Windows, Eibach Pro-Kit springs,Whiteline Front/Rear adjustable sway bars,Cupra R intake, Forge Turbo Inlet pipe,BMC panel filter, APR stage one flash,
Dunlop SP sport MAXX, Forge Polished upper front strut brace. 3'' downpipe and highflow cat


Loads of fun :
mitch_lx is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2006, 11:22 AM   #12
Forest Bear
Regular Member
 
Join Date: Jul 2005
Posts: 172
Default

Got call from Advance Alloy Repairs. They said only way to repair was to machine away which I am not keen on. I thought they would drop some molten alloy onto the affected area and machine the area to flush with rest of wheel. Not keen on having an unbalanced wheel. I'm gonna buy a spair rim from Ford parts.
Forest Bear is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2006, 01:43 PM   #13
Pieoter
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 792
Default

They machine it away and then rebalance the rim
__________________
COLORADO RED FIESTA ZETEC
MODS - Window Tint, Bmc Panel Filter, Euro Plates, Ghia grill, Momo F16 leather gearknob, Momo Leather gearboot, WQ Zetec Front sway bar, WQ Zetec Sway bar links, WQ Zetec bushes.
ICE - Alpine CDA9827, MbQuart Reference 6.5inch splits, MbQuart Reference rears, Rockford Fosgate Punch Stage 3 12inch Sub, Rockford Fosgate P4004 + P3001.
Pieoter is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:43 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL