Go Back   Australian Ford Forums > MotorSport > Drag Racing

Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway.

Reply
 
Thread Tools Display Modes
Old 26-04-2009, 12:12 PM   #1
Peeler
RC NITRO TRUCK addict
 
Peeler's Avatar
 
Join Date: Jan 2007
Location: WA Perth
Posts: 224
Default std FG F6 runs a 12.59

at the Motorplex H v Ford the wife took the F6 out for a play
she didnt do to well on the dial your own time , she dialed in at @12.65 but she broke out and went to fast with a pb @12.59et at 112mph
it must be starting to loosen up abit , and is very close to needing new rear tyres, she has asked for some Toyo,s tyres , i might have to get her some

__________________
XR8 250 PURSUIT ,silhouette, manual, hardcover/spoiler
FG F6 310 sdn XFT
SY T awd terry
LC GTR304 t350 9inch
VK BT1 LSX 454R p/glide 9inch

LX SLR LS3 p/g 9 current project
Peeler is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 12:24 PM   #2
Windsor220
Now Fordless
 
Windsor220's Avatar
 
Join Date: Aug 2005
Location: Fremantle, WA
Posts: 3,611
Default

Cripes!
Windsor220 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 01:04 PM   #3
FPV8U
BOSS 5.4L Enthusiast
 
FPV8U's Avatar
 
Join Date: Aug 2005
Posts: 21,895
Default

F6 has really set the benchmark in the Aussie sedan scene, amazing times for a std machine.
FPV8U is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 01:05 PM   #4
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

That thing is still stock huh?
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 01:26 PM   #5
B&D Racing
Banned
 
B&D Racing's Avatar
 
Join Date: Mar 2009
Location: Gold Coast
Posts: 766
Default

Last night watched a red one go 12.61 at Willowbank in adaptive mode .. earlier went 13.1 in drive ..very impressive !!

Mid 12 factory car with sticky rubber anyone ?
B&D Racing is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 01:31 PM   #6
Peeler
RC NITRO TRUCK addict
 
Peeler's Avatar
 
Join Date: Jan 2007
Location: WA Perth
Posts: 224
Default

Quote:
Originally Posted by The Monty
That thing is still stock huh?
it sure is , in perf mod ,the tyres are just getting smaller
it had half a tank of fuel and a esky in the back
__________________
XR8 250 PURSUIT ,silhouette, manual, hardcover/spoiler
FG F6 310 sdn XFT
SY T awd terry
LC GTR304 t350 9inch
VK BT1 LSX 454R p/glide 9inch

LX SLR LS3 p/g 9 current project
Peeler is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 02:02 PM   #7
CAT600
I miss my wheelbarrow
Donating Member3
 
CAT600's Avatar
 
Join Date: Jan 2005
Location: Bluestreak Performance
Posts: 11,500
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always willing to help out fellow AFF members... Technical Contributor: For members who share their technical expertise. - Issue reason: Daniels knowledge of modular engines and superchargers is extremely valuable to the AFF community. I have learnt quite a bit just reading his build threads. His contributions are often utilised by other members. 
Default

Great job mate, you wont need a tune the way your going.... I dont know how much wheelspin your getting, but im sure that if you bolted a set of track semis on there, the thing will run close to 12.0's and still be 100% street.

What was your 60'?

Daniel
CAT600 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 03:25 PM   #8
AUXRATE
FG F6 310, AU2 XR8
 
AUXRATE's Avatar
 
Join Date: Jun 2005
Location: Armadale, Western Australia with "Peeler"
Posts: 98
Default

Quote:
Originally Posted by CAT600
Great job mate, you wont need a tune the way your going.... I dont know how much wheelspin your getting, but im sure that if you bolted a set of track semis on there, the thing will run close to 12.0's and still be 100% street.

What was your 60'?

Daniel

60' = 2.042 is about the best I've got.
AUXRATE is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 03:28 PM   #9
CAT600
I miss my wheelbarrow
Donating Member3
 
CAT600's Avatar
 
Join Date: Jan 2005
Location: Bluestreak Performance
Posts: 11,500
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always willing to help out fellow AFF members... Technical Contributor: For members who share their technical expertise. - Issue reason: Daniels knowledge of modular engines and superchargers is extremely valuable to the AFF community. I have learnt quite a bit just reading his build threads. His contributions are often utilised by other members. 
Default

Should go close to a 1.85 with better grip so therefore the car could go ~ 12.2 at 110-112mph

That is hooking for a standard car with only "310kw" output and 1900kgs with driver.

Daniel
CAT600 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 04:21 PM   #10
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

That is just insane. Congrats, and also congrats to Ford.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 04:55 PM   #11
WASP
Whipple Induced
 
WASP's Avatar
 
Join Date: Jan 2005
Location: WWW
Posts: 4,338
Default

All I can say is Crickey!!...oh and that woman can drive
__________________
Quote:
“You can't build a reputation on what you are going to do.- Henry Ford”
WASP is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 05:13 PM   #12
ADSXR8
FF.Com.Au Hardcore
 
Join Date: Oct 2005
Location: Not home often
Posts: 2,084
Default

Quote:
Originally Posted by CDAA
All I can say is Crickey!!...oh and that woman can drive
She sure can, but wow, that time and mph........WOW.
__________________
1994 XR8 Sprint
ADSXR8 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 05:17 PM   #13
XRCIST
FF.Com.Au Hardcore
 
XRCIST's Avatar
 
Join Date: Feb 2005
Location: Melbourne
Posts: 2,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

That is unbelievable!!! Wait till Winter really sets in and this thing will be in the 12.4s on street tires
XRCIST is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 06:10 PM   #14
F6BF
Regular Member
 
Join Date: Jan 2006
Location: Sydney
Posts: 448
Default

Awesome time well done, thats a fast factory car
__________________
FG F6 sedan
Stock 12.29 @ 113mph on mt et street tyres
XR6T Sprint winter white
XR8 Sprint winter white
GTF Octane manual

FS: ZF 6 sp trans & converter out of stock BF mk2 typhoon
F6BF is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 06:20 PM   #15
CRAIGAU3220
Cat be Still !!!
 
CRAIGAU3220's Avatar
 
Join Date: Oct 2007
Location: Perth. WA
Posts: 1,672
Default

Quote:
Originally Posted by XRCIST
That is unbelievable!!! Wait till Winter really sets in and this thing will be in the 12.4s on street tires
Unfortunatly the Motorplex is closed between the end of May and the beginning of September.
CRAIGAU3220 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 06:24 PM   #16
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,835
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default

Quote:
Originally Posted by CAT600
Should go close to a 1.85 with better grip so therefore the car could go ~ 12.2 at 110-112mph

That is hooking for a standard car with only "310kw" output and 1900kgs with driver.

Daniel
Umm, is the wifey 100kgs?

gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 06:29 PM   #17
CRAIGAU3220
Cat be Still !!!
 
CRAIGAU3220's Avatar
 
Join Date: Oct 2007
Location: Perth. WA
Posts: 1,672
Default

Quote:
Originally Posted by gcg2503
Umm, is the wifey 100kgs?

Peeler and his wife together might just crack a 100kg
CRAIGAU3220 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 06:39 PM   #18
fritzz
Regular Member
 
fritzz's Avatar
 
Join Date: May 2005
Location: WA
Posts: 358
Default

very impressive...

every run i seen was a 12sec pass
__________________
# 1997 EL Falcon GLI - Custom built AU 4L bottom end, Billet Turbos B76-GTS, Nizpro plenum, 6boost manifold, Autronic SM4, Custom billet surecam camshaft, 3x 044 pumps and custom undercar surge tank, Custom 4" exhaust, ID2000 Injectors, 60mm Turbosmart gate, Turbosmart race port bov, , Tremec TKO 600, Cebco 330mm Brakes, 3.7:1 9" diff with billet axles and trutrack center 608rwkw, 9.6sec 1/4mile

# 2008 FPV FG GTE - Xa Coilovers, 20x8.5/ 20x10 fairladys
fritzz is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 06:52 PM   #19
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,835
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default

That is a bog stock time on std tyres ? very impressive indeed

well done to mrs Peeler !
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2009, 06:59 PM   #20
CAT600
I miss my wheelbarrow
Donating Member3
 
CAT600's Avatar
 
Join Date: Jan 2005
Location: Bluestreak Performance
Posts: 11,500
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always willing to help out fellow AFF members... Technical Contributor: For members who share their technical expertise. - Issue reason: Daniels knowledge of modular engines and superchargers is extremely valuable to the AFF community. I have learnt quite a bit just reading his build threads. His contributions are often utilised by other members. 
Default

Quote:
Originally Posted by gcg2503
Umm, is the wifey 100kgs?

I bet you that an FG F6, with enought fuel to prevent surge and an "esky" in the boot brings the car to 1840+kg.

Daniel
CAT600 is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2009, 04:05 PM   #21
Corzza
777
 
Corzza's Avatar
 
Join Date: Oct 2008
Location: Neutral Bay, NSW. Born and Bred in the RSA!
Posts: 8,464
Default

HOLY MOTHER OF BEEEEEEPP!!!

Did she give it a go in manual mode?
__________________
It's Good To Be Back.

Race 2 Clipsal 500 2014

https://www.youtube.com/watch?v=8NOZvWBp4Eo


"I plucked her into first, gave it some jandal and F@#$ Yeah!" - Scott McLaughlin
Corzza is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2009, 10:24 PM   #22
schnoods
FF.Com.Au Hardcore
 
schnoods's Avatar
 
Join Date: Jul 2006
Location: Rockingham WA
Posts: 1,234
Default

Awesome time indeed, was within a tenth of a second with the W427 going up the strip.

Amazing stuff!
__________________
A philosopher is a person who finds a problem for every solution . :Reverend:

95 EF XR8, Advance headers, Vortech V2 t trim blower, Ported Cobra Manifold, Capa Switch Chip Eliminator. 307 rwhp 395 ft/lb 13.2 @ 105mph

Now NA- AFR 165 heads, 1.6RR, Ported Cobra 269rwhp 14.2 ... needs stall and 4.11's

1977 CL Chrysler Panel Van, 360, 727 torqueflite auto soon to be restored.
schnoods is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2009, 10:28 PM   #23
Polyal
Virtuous Bogan (TM)
Donating Member2
 
Polyal's Avatar
 
Join Date: Jan 2005
Location: TAS
Posts: 27,483
Default

Hell yeah thats great!
__________________
  • 2023 Mitsubishi Triton
  • 2017 Mitsubishi Pajero Sport
  • 2003 CL7 Honda Accord Euro R (JDM) - K20A 6MT
  • 1999 Lexus IS200 - 1G-FE Turbo 6MT
  • 1973 ZF Ford Fairlane
Polyal is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2009, 10:57 PM   #24
747jet
2 4 turning 2 4 burning
 
747jet's Avatar
 
Join Date: Jul 2008
Location: in a house
Posts: 844
Default

well done love it for a stock car you hot mate
747jet is offline   Reply With Quote Multi-Quote with this Post
Old 28-04-2009, 05:53 AM   #25
greenfoam
FF.Com.Au Hardcore
 
Join Date: Apr 2006
Posts: 976
Default

Nice time, although I was more impressed when I saw you had a CR500, not many people understand the dangers and fear of God involved with riding those things. Makes a 12 second F6 look like a push bike
greenfoam is offline   Reply With Quote Multi-Quote with this Post
Old 28-04-2009, 02:32 PM   #26
ADSXR8
FF.Com.Au Hardcore
 
Join Date: Oct 2005
Location: Not home often
Posts: 2,084
Default

Quote:
Originally Posted by greenfoam
.although I was more impressed when I saw you had a CR500, not many people understand the dangers and fear of God involved with riding those things.
Aint that the truth. I am 130 kg and can wheel stand 4th gear! I'll stick to my G6ET and CRF450!
__________________
1994 XR8 Sprint
ADSXR8 is offline   Reply With Quote Multi-Quote with this Post
Old 28-04-2009, 09:26 PM   #27
Peeler
RC NITRO TRUCK addict
 
Peeler's Avatar
 
Join Date: Jan 2007
Location: WA Perth
Posts: 224
Default

Quote:
Originally Posted by greenfoam
Nice time, although I was more impressed when I saw you had a CR500, not many people understand the dangers and fear of God involved with riding those things. Makes a 12 second F6 look like a push bike
its a bike that you never get bored on , i fell off the back last time i rode it, ok it spat me off
__________________
XR8 250 PURSUIT ,silhouette, manual, hardcover/spoiler
FG F6 310 sdn XFT
SY T awd terry
LC GTR304 t350 9inch
VK BT1 LSX 454R p/glide 9inch

LX SLR LS3 p/g 9 current project
Peeler is offline   Reply With Quote Multi-Quote with this Post
Old 29-04-2009, 02:18 PM   #28
03XR6T
Banned
 
Join Date: Aug 2007
Posts: 86
Default

Congrats on the extremely fast time!!
I doubt there is a 1.8x 60' time in it on the stock tune though as has been suggested, torque tags & the absence of 'launch control' will prevent boost off the line. Shifting 1900+kg's of weight off the line is never going to be sub 2.0 without boost imo...
Tune, slicks & hello 11's
03XR6T is offline   Reply With Quote Multi-Quote with this Post
Old 29-04-2009, 02:25 PM   #29
smasht
Regular Member
 
smasht's Avatar
 
Join Date: Dec 2008
Location: at work
Posts: 217
Default

Quote:
Originally Posted by ADSG6ET
Aint that the truth. I am 130 kg and can wheel stand 4th gear! I'll stick to my G6ET and CRF450!
Jump on a TT500 that is modded to run on Nitro....thats scary!

Both the CR500 and CRF450 are amazing machines though!!

Edit:- AMAZING TIME, congrats! one day im going to have to see some drags i think
__________________

BA XR8 Silhouette Ute
Premium Sound
BPR CAI
Highflow Cats
Cat back + rear muffler removed
Custom tune (HP) by Chris BPR
DBA's + Bendix Ultimates

230.6 rwkw!


!NO HEADERS!


Mods to come (on a budget) -
Tripod and gagues
Lowered
Oil Pump Gears
Diff Ratio Change (3.7s?)
Underdrives
DF / Pacemaker headers?
Cams?
Sunroof

~Soon to be a weekender~
smasht is offline   Reply With Quote Multi-Quote with this Post
Old 14-05-2009, 09:01 PM   #30
Tiapan
XF 393 3v CHI heads
 
Tiapan's Avatar
 
Join Date: Nov 2005
Location: Perth
Posts: 1,437
Default

Quote:
Originally Posted by Peeler
at the Motorplex H v Ford the wife took the F6 out for a play
she didnt do to well on the dial your own time , she dialed in at @12.65 but she broke out and went to fast with a pb @12.59et at 112mph
it must be starting to loosen up abit , and is very close to needing new rear tyres, she has asked for some Toyo,s tyres , i might have to get her some
I have seen her down there! man she flys! you are currently making 405kw at the engine! get exited!
__________________
XF Falcon, 393 Clevo. 11.01@123mph
"RAZNREVNU"
Tiapan is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:50 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL