|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
12-02-2006, 06:37 PM
|
#1 | ||
|
Regular Member
Join Date: Sep 2005
Posts: 193
|
hey! well after all weekend of grazing knuckles and calling everything a ИИИИ. myself and the old man finally got the EA converted to MPFI. everything was working Perfect. fuel was being pumped engine was turning over, but one problem. no spark! we spent about 5 hours doing every single test known to mankind. we swapped dizzy's and coils and still nothing!! the coil is working and the dizzy is spinning but there is still no spark. now if anyone at all can throw ideas at us that would be great!
im sure it will be something to do with the wiring now to my second question. there is a little pink wire with blue swirls (not blue trace) is located nere the plugs that go into the thermostat. now the loom that we are using has no pink wire to join with it? we have a few EAs in the family and have found that some do have the wire and some dont! does anyone at all know what this wire is for? iv included pictures in this thread. cheers guys |
||
|
|
|
12-02-2006, 06:41 PM
|
#2 | ||
|
[EBGLT]
Join Date: Sep 2005
Location: Cazza Dee
Posts: 4,829
|
Remember there is a differnce between the distributers in CFI to MPFI.
__________________
[EBGLT] Become an E-Series Owners Club Member Today!
http://eseries.com.au/index.php/membership/ |
||
|
|
|
|
12-02-2006, 06:46 PM
|
#3 | ||
|
Banned
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
|
It'll still run with the wrong dizzy in though.
|
||
|
|
|
|
12-02-2006, 06:49 PM
|
#4 | ||
|
[EBGLT]
Join Date: Sep 2005
Location: Cazza Dee
Posts: 4,829
|
Runs like crap though i accidently put a MPFI dizzy in my CFI and it ran like poo and could not get there timing right it was everywhere!!
__________________
[EBGLT] Become an E-Series Owners Club Member Today!
http://eseries.com.au/index.php/membership/ |
||
|
|
|
|
12-02-2006, 06:52 PM
|
#5 | ||
|
Regular Member
Join Date: Sep 2005
Posts: 193
|
we put a mpfi dizzy in it. tried 2 of them actully. they work perfect but no damn spark!
|
||
|
|
|
|
12-02-2006, 06:56 PM
|
#6 | ||
|
[EBGLT]
Join Date: Sep 2005
Location: Cazza Dee
Posts: 4,829
|
Cool suppose you just go over evrything check everything is connected properly check from you dizzy to the coil also!!
__________________
[EBGLT] Become an E-Series Owners Club Member Today!
http://eseries.com.au/index.php/membership/ |
||
|
|
|
|
12-02-2006, 07:06 PM
|
#7 | ||
|
Regular Member
Join Date: Sep 2005
Posts: 193
|
any idea what that pink wire is or does
|
||
|
|
|
|
12-02-2006, 07:08 PM
|
#8 | ||
|
Banned
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
|
I think the wire is for the air con comp?
|
||
|
|
|
Urgent Help!! (no Spark)
Linear Mode
