|
|
|
|
|
|
|||||||
| Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
 |
|
|
Thread Tools | Display Modes |
08-01-2008, 10:20 PM
|
#1 | ||
|
Supercharged Mang-mobile
Join Date: Jul 2005
Location: Behind the wheel
Posts: 1,792
|
Hey everyone, I'm soon taking delivery of an t5 fitted, EL XR6.
One thing im planning to do is have a go taking it down the strip at willowbank. As i've never done this before im abit curious in regards to how to launch the car properly to get a decent launch without bogging down or going up in smoke lol. Anyone have any advice? Thanks, Sam
__________________
09/00 VX HSV XU6 Build #0001 of 0171 http://fordforums.com.au/showthread....09#post5571209 -- Best E/T: |14.982 @92.12mph | R/T:0.013 | 60' 2.213| 330: 6.283 | 1/8: 9.624 @ 73.17mph | 1000: 12.529 | 25Deg, N/A Hum, 1010mb | Willowbank Raceway 7/12/16 Tickford EL Falcon XR6 RIP  -- Factory Manual -- Best E/T: |14.991 @ 92.71mph | R/T: 0.607 | 60': 2.215 | 660': 9.665 |13Deg, 86%H, 1024mb, 184RA @ Willowbank Raceway |
||
|
|
|
08-01-2008, 10:56 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Location: Rockingham WA
Posts: 1,234
|
Try 3000 first up, if it bogs down go up 500 rpm. Go up in smaller increments until you pretty much find a happy medium. Ease it first off and as you get a few runs you'll know how harsh you can release the clutch before it becomes useless.
Also the BBM comes on around 3500-4000 as well so it will be a bit different trying to launch at that rpm, it will probably tyre spin. Also depends on what wheels you're running. If it is low profiles, a small burnout (if that) just to get the water off should be fine. Too big and the tyres leach a bit, become too soft and will just spin. But half the fun is finding these things out the hard way.  it:
__________________
A philosopher is a person who finds a problem for every solution . :Reverend: 95 EF XR8, Advance headers, Vortech V2 t trim blower, Ported Cobra Manifold, Capa Switch Chip Eliminator. 307 rwhp 395 ft/lb 13.2 @ 105mph Now NA- AFR 165 heads, 1.6RR, Ported Cobra 269rwhp 14.2 ... needs stall and 4.11's 1977 CL Chrysler Panel Van, 360, 727 torqueflite auto soon to be restored. |
||
|
|
|
|
08-01-2008, 11:13 PM
|
#3 | ||
|
Supercharged Mang-mobile
Join Date: Jul 2005
Location: Behind the wheel
Posts: 1,792
|
Sweet ill give that a go. Thanks for that!
__________________
09/00 VX HSV XU6 Build #0001 of 0171 http://fordforums.com.au/showthread....09#post5571209 -- Best E/T: |14.982 @92.12mph | R/T:0.013 | 60' 2.213| 330: 6.283 | 1/8: 9.624 @ 73.17mph | 1000: 12.529 | 25Deg, N/A Hum, 1010mb | Willowbank Raceway 7/12/16 Tickford EL Falcon XR6 RIP -- Factory Manual -- Best E/T: |14.991 @ 92.71mph | R/T: 0.607 | 60': 2.215 | 660': 9.665 |13Deg, 86%H, 1024mb, 184RA @ Willowbank Raceway |
||
|
|
|
|
09-01-2008, 12:46 PM
|
#4 | ||
|
KenneBell Australia
Join Date: Nov 2005
Location: Engine building room
Posts: 1,965
|
Watch the input shaft........
__________________
Bluepower Racing Developments Proud Australian Distributors of Kenne Bell superchargers The Quickest, The Fastest, The Baddest Boss Blower of all. www.bluepower.com.au |
||
|
|
|
correct launching technique
Linear Mode
