Go Back   Australian Ford Forums > MotorSport > Drag Racing
Reload this Page Finally my 3V has the 13 sec slip it deserves !
Register FAQ Calendar

Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway.

Reply
 
Thread Tools Display Modes
Old 01-06-2006, 01:16 AM   #1
Mr. CVE
If it aint Blown it Sucks
 
Mr. CVE's Avatar
 
Join Date: Dec 2004
Location: S E Melbourne
Posts: 2,115
Default Finally my 3V has the 13 sec slip it deserves !
Was in Sydney for work, thought I may as well take my BA Ghia to WSID and see what it does.
did 4 runs and last run was 13.52 @ 102 mph
could have gone further but had to leave at 8.30 for work commitments.

These runs were in full street trim, even on the taller 20" rims.
Complete with full CVE / Bluepower inlet system.
And full CVE / Redback exhaust system
Maybe one day I will put drag tyres on it to see what it is capable of, but not for now.
The runs were on Mobil 8000 fuel, its main issue is traction, try to stall it up and it just wheel spins.

But I must admit the track is sticky all the way to the end of the 1/4 mile.
The best thing was each run i did was against gen 3's and I beat them everytime.

According to my wife I am going to leave it alone now.....
We will see !! :hihi:

__________________
Australia's fastest 3V n/a Ghia 13.52 @ 102 mph
@235 rwkw !!
Now turbo 11.77 @114 mph
320 rwkw, 810 nm torque, 280rwkw @3000 rpm !! :thebirds:
Now for sale
http://www.fordforums.com.au/showthread.php?t=11296772

Thanks to Snort Performance, Headsex and CVE
Street car DeTomaso Pantera
Drag car 1995 Mustang, Haleys Comet ( It's back !)
Power by CVE
Melbourne's first SNIPER Tuner :
Now tuning E series
Mr. CVE is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 08:18 AM   #2
dansedgli
FF.Com.Au Hardcore
 
dansedgli's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
Default
Great Work Paul!
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi.
dansedgli is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 09:15 AM   #3
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default
Nice one godd times for a BA ghia in street trim. Stock they tend to be lardy and lazy on the qtr so you've done well.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 04:36 PM   #4
347_XR8
Slide Baby Slide
 
347_XR8's Avatar
 
Join Date: Mar 2005
Location: SA - The Drift State
Posts: 2,662
Default
Good work Paul!
__________________
:the_finge You want more inches...........STROKE IT!!! :the_finge

Mr Super Skid-Man
347_XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 06:34 PM   #5
banarcus
hmm eyebrows
 
banarcus's Avatar
 
Join Date: Jan 2005
Location: Lower Hunter Valley, NSW
Posts: 2,391
Default
I'd love to see the other drivers' faces when you beat them.... in a Fairmont hehehe.
__________________
1999 Range Rover 4.6 V8. Soon to have a new blue oval bent eight.
banarcus is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 06:43 PM   #6
XRCIST
FF.Com.Au Hardcore
 
XRCIST's Avatar
 
Join Date: Feb 2005
Location: Melbourne
Posts: 2,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default
Impressive time!!! So have you just got the intake and exhaust or an edit aswell?
XRCIST is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 07:18 PM   #7
Quadcams
FF.Com.Au Hardcore
 
Quadcams's Avatar
 
Join Date: Jan 2005
Location: Working, chasing after my daughter and working
Posts: 3,407
Default
Quote:
Originally Posted by v8capri
Was in Sydney for work, thought I may as well take my BA Ghia to WSID and see what it does.
did 4 runs and last run was 13.52 @ 102 mph
could have gone further but had to leave at 8.30 for work commitments.

These runs were in full street trim, even on the taller 20" rims.
Complete with full CVE / Bluepower inlet system.
And full CVE / Redback exhaust system
Maybe one day I will put drag tyres on it to see what it is capable of, but not for now.
The runs were on Mobil 8000 fuel, its main issue is traction, try to stall it up and it just wheel spins.

But I must admit the track is sticky all the way to the end of the 1/4 mile.
The best thing was each run i did was against gen 3's and I beat them everytime.

According to my wife I am going to leave it alone now.....
We will see !! :hihi:
Well done Paul another 3v punching out a good time, big improvement to.

What was your 60ft?
Quadcams is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 08:02 PM   #8
Headsex
headsexTuned
 
Join Date: Dec 2004
Location: Melb
Posts: 769
Default
Ohh.. You forgot something

"And i'd like to thank Headsex for such a great tune, and i especially love his auto shift modifications"

:>
Headsex is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 08:05 PM   #9
Headsex
headsexTuned
 
Join Date: Dec 2004
Location: Melb
Posts: 769
Default
Quote:
Originally Posted by XRCIST
Impressive time!!! So have you just got the intake and exhaust or an edit aswell?
Been tuned, THere's no way you can get that time with torque reduction showing its face
Headsex is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 08:50 PM   #10
LTDHO
The one and only
 
LTDHO's Avatar
 
Join Date: Dec 2004
Location: Carrum Downs, Victoria
Posts: 9,050
Default
Good work, well done CVE.

I've had the pleasure of driving this car and it's such a sleeper!
__________________
1992 DC LTDHO 360rwkw built by me
Tuned by CVE Performance
Going of the rails on a crazy train
Other cars include Dynamic ED Sprint, Dynamic DL LTD, Sparkling Burgundy DL LTD, Yellow, Red & Blue XB sedan & Black XB Coupe
LTDHO is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 09:26 PM   #11
Mr. CVE
If it aint Blown it Sucks
 
Mr. CVE's Avatar
 
Join Date: Dec 2004
Location: S E Melbourne
Posts: 2,115
Default
Quote:
Originally Posted by Lowride260
Well done Paul another 3v punching out a good time, big improvement to.

What was your 60ft?
60 ft time was 1.987.
left the line at around 1000 rpm, if i tried 1500 it just lit em up.
was shifting gears at 5500 rpm.
was chirping gears in 2nd and i almost think it chirped 3rd. must admit the auto programming done by headsex is very good at turning the auto from a slushbox to nice firm shifts.
__________________
Australia's fastest 3V n/a Ghia 13.52 @ 102 mph
@235 rwkw !!
Now turbo 11.77 @114 mph
320 rwkw, 810 nm torque, 280rwkw @3000 rpm !! :thebirds:
Now for sale
http://www.fordforums.com.au/showthread.php?t=11296772

Thanks to Snort Performance, Headsex and CVE
Street car DeTomaso Pantera
Drag car 1995 Mustang, Haleys Comet ( It's back !)
Power by CVE
Melbourne's first SNIPER Tuner :
Now tuning E series
Mr. CVE is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 11:03 PM   #12
XRCIST
FF.Com.Au Hardcore
 
XRCIST's Avatar
 
Join Date: Feb 2005
Location: Melbourne
Posts: 2,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default
Quote:
Originally Posted by Headsex
Been tuned, THere's no way you can get that time with torque reduction showing its face
Yeah I thought so, Paul didnt mention it in the first post that's why i asked. You gotta love the auto shifting mod, my shifts have been firmed up and its a dream, i cant get enough of it :
XRCIST is offline   Reply With Quote Multi-Quote with this Post
Old 01-06-2006, 11:13 PM   #13
CRUSHU F150
Gettin' Bigger ;)
 
CRUSHU F150's Avatar
 
Join Date: Dec 2004
Location: Carrum Downs VIC
Posts: 602
Default
Good stuff!! Damn quick for a heavy weight Ghia!!

Did you at least empty your boot? Or did you do it with all your work crap in the boot?
__________________
79 F150 400ci 6/71 Intercooled 12" Lift 44" Tyres
66 Mustang LHD 418W
Build Up HERE
http://img.photobucket.com/albums/v3...ancedsmall.jpg
CRUSHU F150 is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2006, 02:23 PM   #14
vino3o2
owning V8=having no $$$
 
vino3o2's Avatar
 
Join Date: Mar 2005
Location: Brisbane...
Posts: 1,717
Default
Great work and great time to...very impresive, what the wife does'nt know wont hurt..
__________________
Weekends - 1965 XP 302 sedan... :
Weekdays - 1980 323 Mazdabator complete with cheese cutters & FF sticker :dr_Evil:

The Reality: 13.1 @ 106mph.... The Goal: somehow get into the 12s!!! :sm_headba

www.qldsuperkart.org
vino3o2 is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2006, 03:53 PM   #15
EFFalcon
Last warning
 
EFFalcon's Avatar
 
Join Date: Dec 2004
Location: Mornington Peninsula, Victoria HeadCount: 3
Posts: 11,194
Default
Awesome work Paul.
doing it in style with the Ghia on 20's
__________________
FALCN6 - Turbo, Air Bag Suspension - Hibernating
EL GT - Supercharged
NASCAR - 83 Thunderbird , Bagged
DAILY - BA Fairlane Ghia, Boss 260 Turbo
OFFROADER - Ford Explorer
EFFalcon is offline   Reply With Quote Multi-Quote with this Post
Old 03-06-2006, 05:56 PM   #16
Redrum
Force Fed Fords
 
Redrum's Avatar
 
Join Date: Nov 2005
Location: Victoria
Posts: 5,556
Default
Great stuff, bet those Gen 3 guys would not have been happy campers, seeing what most would assume is a luxury barge beating them. Obviously a very quick luxury barge.......... :thebirds: :thebirds: :thebirds:
__________________
2021 Focus ST-3 Mountune Enhanced
Redrum is offline   Reply With Quote Multi-Quote with this Post
Reply

« Previous Thread | Next Thread »

Forum Jump


All times are GMT +11. The time now is 05:34 PM.

Australian Ford Forums - Privacy Statement - Terms of Service - Top

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL