|
|
|
|
|
18-08-2013, 01:31 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 137
|
my rear sl king springs have sagged a bit with the lgp tank.
rather than get new sl's and have them sag again or goto low's and have it sit too high i was thinking that maybe i could get some coil spacers about 15mm thick to bring the height back to where it should be. is this as simple as it sounds or am i missing something here? |
||
|
|
|
18-08-2013, 02:13 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
i don't see why it would not work, but if it were me , i think i fork out for some more suitable springs, perhaps a bit heavier to make up for the added weight of the lpg tank.
|
||
|
|
|
|
18-08-2013, 03:03 PM
|
#3 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 137
|
a bit heavier would be nice, but then what springs would i go for? and it would be a bit of a gamble getting the height right.
|
||
|
|
|
|
18-08-2013, 05:23 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
sorry i wouldn't have a clue mate, a suspension place should be able to give you a heads up.
|
||
|
|
|
|
18-08-2013, 05:44 PM
|
#5 | ||
|
Auto Nerd
Join Date: Feb 2012
Location: Sydney
Posts: 808
|
If it helps you, I have a dual fuel set up on an AU III. Have king lows on all round.
From hub to guard. Front - 355mm Rear - 345mm. |
||
|
|
|
|
18-08-2013, 07:44 PM
|
#6 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 137
|
yeah, mine are 335mm front and 320mm rear. i just put a jack under the towbar and lifted it upto 345mm, it still looked pretty good so it might be a good compromise.
|
||
|
|
|
|
18-08-2013, 09:28 PM
|
#7 | ||
|
Peter Car
Join Date: Dec 2004
Location: geelong
Posts: 23,145
|
I used Whiteline 10mm coil spacers in the rear of my Fairlane.
|
||
|
|
|
coil spacers to lift rear
Linear Mode
