|
22-10-2006, 06:40 PM | #1 | ||
Starter Motor
Join Date: Oct 2006
Posts: 2
|
Hi All, New here, been reading through the forums for weeks now.
I Have a 95 KJ Laser Liata LXI I Am about to install a POD filter to replace the standard Air Box. Do I need to keep the air flow meter? Also Could someone please explain how to do it? I've got a pretty good idea so far just want to be sure. Got a Lukey sports exhaust system on it and im hoping this will let the engine breathe a bit better. thanks |
||
22-10-2006, 10:43 PM | #2 | ||
What a performer!
Join Date: Jul 2005
Location: SA, Northern Suburbs
Posts: 599
|
Yes, without your AFM you're screwed.
It goes Intake>Pipe>AFM>Pod You'll need some sort of connector that you can buy from autobarn etc. Realise that without a heat sheild all your pod is going to do is suck in engine bay hot air which might infact make it worse rather than better.
__________________
1981 Ford Laser KA :: E5 :: 2002-2003 1989 Ford Laser KE TX3 :: BP :: 2003-2007 75fwkW 1990 Ford Laser KF TX3 :: BP :: 2010-2011 1991 Ford Laser KF TX3 :: BP-T :: 2011-2015 109fwkW 2007 Ford Falcon BF XR6 Turbo Ute :: Barra 245T :: 2014-2019 324rwkW 1998 Ford Falcon AU XR8 Ute :: Windsor V8 :: 2019-2020 2008 Ford Fiesta XR4 :: Duratec 150 :: 2021-* 1998 Ford Falcon AU XR6 :: HP Intech :: 2021-* |
||
23-10-2006, 09:06 AM | #3 | ||
Starter Motor
Join Date: Oct 2006
Posts: 2
|
Thanks Vippen,
I have a customised manifold that comes from the intake near the front wheels and comes up mto a half shroud to direct some cold air onto it, but i will monitor it and see how i go |
||
11-03-2008, 07:19 PM | #4 | ||
Starter Motor
Join Date: Mar 2008
Posts: 1
|
Crosfirkj, for your pod filter did you use the tx3 adaptor? if not which one will fit? s.o.s
|
||