Carburettor for 1980 Cortina TF 2ltr

[CortinaTF]

Hi, does anybody have or know where I can get a weber a DGV or a DGAV carburettor with choke assembly for 1980 2 litre Cortina TF.

Thanks

[XRNIL8]

PM me and I will give you the email address of the guy I just bought a TF off of in Albury. He has a 4 cylinder wagon sitting out in the paddock that is going to be sent to the scrap yard, so is really happy to sell bits from it. ;)

[XRNIL8]

How did you go?

[CortinaTF]

Thomas has the carby I want but he is asking too much for it.Thanks for all your help.

[Sterling]

search ebay man. and if that doesnt work search ebay.co.uk

[Sterling]

hey i found a carby here dunno if its the right one have a look

http://cgi.ebay.com.au/weber-carby-3...QQcmdZViewItem

[greenmk2]

Originally Posted by Sterling

hey i found a carby here dunno if its the right one have a look

http://cgi.ebay.com.au/weber-carby-3...QQcmdZViewItem

The 2ltr webers are selling at bull poo prices on ebay.. That will sell probibly between 150-$200! Everybody else are using them now gemmini's,Hilux's etc..

I ended up getting a weber off a XE Falcon.. Only cost $50 from wrecker and seems to be working ok. The spark plugs still look good not rich or lean. They have really good choke setup and bolt up the same as 32/36..

http://cgi.ebay.com.au/FORD-XE-XF-WE...QQcmdZViewItem

[SeXC]

I'm pretty sure ive still got a great condition xe weber you can have for $55 postage included........

[Sterling]

Originally Posted by greenmk2

The 2ltr webers are selling at bull poo prices on ebay.. That will sell probibly between 150-$200! Everybody else are using them now gemmini's,Hilux's etc..

I ended up getting a weber off a XE Falcon.. Only cost $50 from wrecker and seems to be working ok. The spark plugs still look good not rich or lean. They have really good choke setup and bolt up the same as 32/36..

http://cgi.ebay.com.au/FORD-XE-XF-WE...QQcmdZViewItem

will this carb fit the pinto manifold right up? what modifcations were done? this is very cheap i think i might just grab it

[greenmk2]

Originally Posted by Sterling

will this carb fit the pinto manifold right up? what modifcations were done? this is very cheap i think i might just grab it

It bolts up to pinto manifold you just need to get longer studs. They have some of type solenoid for the idle circuit that wont allow the motor to idle unless it is hooked up. I just connected it to the ignition wiring. I didnt worry about the electric choke i just removed the choke plates..

The airfilter mounts are different shouldnt be to hard to adaped 32/36 filter...

[Sterling]

awesome thanks