![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Bar For non Automotive Related Chat |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
_Oo===oO_
Join Date: Dec 2004
Location: Australia
Posts: 3,305
|
Hey all,
Just after some advice on where I can go to get anti theft screws off taken off our number plates? As far as I can tell via the VicPol and RACV websites, workshops that are VACC members have the anti theft screw removal tools? Do I just roll up to one and ask for a hand? Any advice *greatly* appreciated!! |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Any autobarn should have the key, I know we have one at work.
__________________
2024 F150 XLT
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#3 | ||
Donating Member
![]() Join Date: Dec 2010
Location: Melbourne, Victoria
Posts: 4,771
|
I used a drill and an old screw driver, drilled a hole tapped in the screw driver with a hammer and twisted
![]()
__________________
Ride 2007 Ripcurl BF Xr6 Ute Mods to Date Ceramic Coated Pacemaker 4495s 2.5" Dual Venom exhaust, Bluepower CAI Eaton True Trac with 3.9s 20% Underdrive EcoLpi Motor RWKW: 200.0 Nm: 394 Mods to Follow Supercharger |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,423
|
Hi. Go and ask your local "community service police officer" (the one who does neighborhood watch and hands out the one way screws) who has the tool in your area. The tool only works on some screws, hardened head with one small flat side, if your screws dont have a small flat you can try using side-cutters to grip the head of the bolt. Cheers MD
__________________
![]() HI ![]() I'M MICHAEL ![]() 2003 ACID RUSH BA FUTURA WAGON ![]() light up window switches | auto on cruise control | doubleclick window lift from remote |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#5 | ||
_Oo===oO_
Join Date: Dec 2004
Location: Australia
Posts: 3,305
|
Thanks b2tf! Will try them tomorrow.
tut0r, dremelling the screws is my second option! https://www.youtube.com/watch?v=g3x6qPWA2a4 |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
\/\/\/\/\/\/\/\/
Join Date: Feb 2006
Posts: 5,694
|
If you don't do the drill idea, is there enough of a head to use a grinder with a fine cutting disc to cut a groove for a screw driver?
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#7 | ||
_Oo===oO_
Join Date: Dec 2004
Location: Australia
Posts: 3,305
|
Yep, if Autobarn cant come to the party I'll turn it into a regular flat head screw with a dremmel disc attachment.
|
||
![]() |
![]() ![]() |
![]() |
#8 | ||
_Oo===oO_
Join Date: Dec 2004
Location: Australia
Posts: 3,305
|
Thanks for all the suggestions! I'll post back with my solution.
|
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Performance moderator
![]() Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
blade screwdriver and push like hell..
If not either cut head to fit blade screwdriver or grind the head off..
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
Thread Tools | |
Display Modes | |
|