![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Dec 2007
Posts: 3
|
G'day people my friend has a 90 model laser 1.8ltr and under acceleration the car really struggles at low revs, but once the revs are up the cars runs alright. I had a ford corsair which had the same problem but was fixed when I replaced the small circuit board (THINGY) under the rotor button, could this be the same as the laser. if so what is the name of this part and where could I buy it from other than going to a ford dealer $$$. any info would be appreciated.
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
the dissy module might be a bosch product
try an auto electrician if not happy buying a ford genuine module
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|