Originally Posted by FastFiesta View Post
Daniel
Age: 35
Car: Ford Fiesta Zetec WQ 1.6 Zetec SE 5 speed manual
List of Mods Completed stage 2.
Thanks to OMEX performance electronics ,Pumaspeed UK, and Burton Power
Direct to Head 45 mm Jenvey Individual Throttle Bodies
High flow Fuel Rail
35mm Air Horns
Fuel Pressure Regulator to 3 bar
OMEX 600 Series Engine Management
Hand Made Wiring Harness
Pumaspeed 4-2-1 stainless steel T304 manifold branch miltek evo 6 sports
Pumaspeed 2.5" hi flow T304 Stainless steel with Sports Cat into Remus Auspuff Sports back box into 2 oval outlet stainless steel.
Recent additions:
Retro fit disc brakes remove rear drums.
Replace with 253mm solid rear disc brakes out of Ford fiesta XR4 and replace OEM Pads with Greenstuff EBC Brake Pads.
Replaced stock Ford calipers and front 258mm Vented DBA performance discs and Pads with EBC Cross drilled, grooved and vented 280mm and EBC Green stuff pads, and XR4 front calipers, and Master cylinder and booster.
Updated new mods currently happening 1.6 Litre duratec coming to a end. :(
New Mods:
Low km Duratec ST out of a wreck
Low Km IB5+ gearbox out of a wreck from Geelong, VIC, removing Quaife ATB Limited slip diff from 1.6 gearbox, and having inspection by gearbox specialists, also fit to IB5+ gearbox remove open std Ford Diff crap!.
Piper Cams Kit
http://www.pipercams.co.uk/pipercams...?pid=KBDUR1892
Genuine Ford 60mm Throttle Body suited to 2.3 Duratec inlet manifold, but will also fit 2.0 Duratec.
Cosworth Inlet Manifold from the States.
http://www.racingpartssolution.com/c...take-manifold/ it's some $700 AUD cheaper then the UK!!
Replacing standard zetec instrument cluster with Fiesta ST cluster and Traction Control Button.
Samco Sport complete Silicone Hose kit including ancillaries to suit ST Mk6
Carry over Airtec Alloy Radiator double thickness compared to OEM one to suit Mk6 Fiesta good enough for Turbo and SC application too. Evans waterless coolant instead of water/coolant mix.
Remove useless EGR crap, and install EGR delete blank off plate from X Power Engines Ltd UK in ebay
Thermal inlet manifold Gasket from Ferriday Engineering UK through forum in the UK
Carry over Pumaspeed 4-2-1 stainless steel T304 manifold branch miltek evo 6 sports
Pumaspeed 2.5" hi flow T304 Stainless steel with Sports Cat into Remus Auspuff Sports back box into 2 oval outlet stainless steel.
OMP Front strut tower bar
Upgraded rear disc brakes with EBC drilled and dimpled, and EBC Redstuff.
Upgraded Rear dampers with Monroe GT sports
Mountune Aluminium Billet Short shifter to suit Mk6 Fiesta which has just been made available to to demand.
http://www.mountunestore.com/collect...hort-shift-arm
Removing all related Jenvey ITB 45mm , and OMEX 600 series
ECU.
Pipercross or KN induction kit depending on space after installation of Cosworth Inlet Manifold.
Last but not least a Full flash and remap to be performed on rolling dyno after completion of mods.