maybe an electronic fault in the gearbox if the torque converter was replaced as well
if injected something from the gearbox TCU to EFI computer controller to throttle body to dissy
if carby something in the gearbox TCU to carby to dissy
normally it is the throttle position sensor causing the problem dont know what voltage it is meant to have ...... might be something like .5 volts
when you put the pedal down the message is not being given to the engine to give more revs for the auto box to respond
check the timing of the engine and any wire connections you can see from the box
a wire or pin may bave broken or is not connected or corroded
a faulty gearbox computer controller or sensor ther is a temp sender for the auto as well
after that call the fitter of the auto
__________________
My car goes Brumm Brumm
|